Can Neway provide full CMM inspection reports and FAIR documentation?

Can Neway Provide Full CMM Inspection Reports and FAIR Documentation?

Confirm CMM and FAIR Capability for the Current Order

Neway CMM inspection reports and FAIR documentation are project-specific deliverables that remain unconfirmed until Neway accepts the defined scope in writing for the current order. Confirm availability, format, measurement access, required records, review authority, price, and timing in the quotation. Ask for a redacted representative report where confidentiality permits and verify that the proposed equipment, personnel, software, and quality process can support the drawing. Keep the deliverable unconfirmed until the purchase order identifies exactly what “full” means and Neway accepts that scope in writing.

What Should Be Included in the Quoted CMM Report?

• Dimensional Measurements: identify each ballooned characteristic to be measured, including size, position, profile, datum-related geometry, hole patterns, slots, and other critical-to-function features.

• Geometric Tolerances (GD&T): state the governing ASME or ISO drawing system, datum alignment, modifiers, evaluation method, and acceptance rule for every applicable control.

• Measurement Tools Used: request the method, equipment and program reference, probe or sensor, fixture and alignment, environmental condition, and relevant calibration evidence.

• Result Summary: require nominal, limits, actual result, deviation, disposition, and unambiguous status for each characteristic; define how inaccessible or conditionally accepted features are reported.

• File Formats: specify PDF, spreadsheet, native data, customer template, numbering, units, language, signatures, revision, and portal-submission requirements before inspection begins.

The linked high-precision CMM systems page is an inquiry route, not evidence that a particular machine or method is available for this order. CMM can suit position, profile, and datum-related geometry, while a bore gauge, micrometer, functional gauge, surface-texture instrument, or another method may better fit other characteristics. Require the supplier to address measurement uncertainty, access, fixturing, surface condition, temperature, repeatability, and data processing. Instrument resolution and catalog accuracy do not guarantee the finished-part tolerance or the validity of a report.

What Should Be Included in a FAIR Package?

FAIR scope must be quoted against the customer requirement. If AS9102 is invoked, state the edition, forms, accountability, signatures, characteristic numbering, and any customer supplements. Do not assume that an “AS9102-style” package equals contractual compliance. A requested package may include:

1. Part Number and Revision Traceability.

2. Material and Process Certifications.

3. Ballooned Drawing with Feature Callouts.

4. Dimensional Inspection Report (linked to CMM).

5. Process Flow and Routing Summary (if required).

6. Certificate of Conformance (CoC).

Define who supplies and approves each record, which characteristics use CMM data, and which use another method. FAIR establishes evidence for the applicable first-production event; it does not prove that later units remain conforming. State triggers for full or partial re-accomplishment after drawing, material, source, tooling, fixture, machine, program, location, special process, or lapse changes. Include rejection handling and the rule for proceeding beyond the first article.

Projects That May Require FAIR and CMM Reporting

Formal reporting depends on the contract and risk, not the industry label alone. Typical contexts include:

• Aerospace and Aviation - may invoke ballooned characteristics, material and process accountability, and AS9102 first-article requirements.

• Medical Devices - may require records for specified critical dimensions, surface characteristics, material, cleanliness, and validated processes.

• Nuclear Components - may require contract-specific document control, traceability, inspection, hold points, and special-process evidence.

• Automation and Robotics - may use measured data for fixture interfaces, datum relationships, aligned housings, or assembly acceptance.

Quick Documentation Planning Guide

For precision machining or multi-axis production, issue a characteristic matrix and document list with the RFQ. Ask Neway to return accepted items, exceptions, methods, outsourced activities, report samples, approval gates, and lead-time effects. Resolve whether every drawing characteristic is ballooned, which results need CMM data, and how non-CMM results enter the same package. Late requests can require re-planning or remeasurement and may be impossible if the delivered state prevents access.

Use these service links as inquiry routes, not capability evidence:

• CNC Machining Service - list CMM, FAIR, CoC, material, process, and inspection deliverables explicitly in the RFQ.

• Precision Machining Service - request a characteristic-level manufacturing and measurement feasibility review.

• CNC Machining Prototyping - use a sample to validate feature access, alignment, measurement strategy, and report format.

• One Stop Service - require responsibility and traceability across machining, outside processing, inspection, certificates, and shipment.